NBS RNA 4900 needle roller bearings

d:45 mm; Max operating temperature, Tmax:120 °C; D1:73.3 mm; Characteristic outer ring frequency, BPF0:6.24 Hz; Nlim:9,900 rpm; Brand:SNR; ra max:1 mm; E:76.5 mm; r1a max:1 mm; d1:59 mm;

B:21 mm; Nlim (grease):8,800 rpm; Fatigue limit load, Cu:0.87 kN; rs min:1.5 mm; ra max:1.5 mm; Mass:0.46 kg; da min:43 mm; Characteristic rolling element frequency, BSF:4.03 Hz; Da max:72 mm; Dynamic load, C:33.5 kN;

J:144 mm; T max.:200 °C; Designation of bearing:UC208-24G2T20; C:29.6 kN; Recommended tightening torque for set screw:8 Nm; A2:51.2 mm; Designation of housing:FL208-; H:175 mm; s1:24.6 mm; B:49.2 mm;

T min.:-20 °C; L1:68 mm; B:33 mm; Designation of housing:PE211N-; Dz:110 mm; L:222 mm; J:176 mm; Designation of closed end cover:SCC211; G:R1/8"; H2:124.5 mm;

End Cap Groove:Yes; Flinger Material:Steel; Ball Grade:Class 10; Max Bearing Speed:5500 rpm; Bearing Duty:Normal Duty; Retainer Material:Nylon; Shaft Attachment (2):D-Lock; Housing Material:Cast Iron; Seal Type:Single Lip; Base to Center Height:Very High;

Brand:Baldor-Dodge; Grease Type:Unirex N2; Ring Size:Standard; Bearing Outer Ring Material:Steel; Ship Weight:3.06 LB; Self Aligning:Self Centering; Flinger Type:Rubberized; Bearing Duty:Normal Duty; Seal Type:Single Lip; Ball Bearing Housing Series:207 Series;

H1:21 mm; A:60 mm; L:135 mm; Dz:100 mm; H:57.2 mm; Designation of housing:PG210N-; E:25 mm; Designation of open end cover:SCOU210-31; C0:23.2 kN; Z:76.1 mm;

Flinger Material:Steel; Retainer Material:Nylon; End Cap Groove:Yes; Ship Weight:16.49 LB; Self Aligning:Self Centering; Ball Material:Steel; UPC:782475881598; Housing Material:Cast Iron; Bearing Inner Ring Material:Steel; Shaft Attachment (2):Grip Tight;

Designation of bearing:EX212-38G2L3; B:61.8 mm; L:195 mm; C:52.5 kN; H3:135; s1:53.2 mm; T min.:-20 °C; d:60.32 mm; e:17 mm; Recommended tightening torque for set screw:16.8 Nm;

Designation of housing:FL207N-; J:130 mm; A1:14 mm; B:37.6 mm; S:18.8 mm; G:M6x1; L:90 mm; T min.:-20 °C; d1:51.1 mm; s1:36.3 mm;

L1:62 mm; A2:24 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; L3:51 mm; H:89 mm; L2:10 mm; A5:19.7 mm; L:97 mm; G:M6x1;

Ball Grade:Class 10; Housing Material:Cast Iron; Housing Coating:Powder Coat; Flinger Type:Rubberized; Bearing Bore Shape:Round; Expansion Type:Non-Expansion; Base to Center Height:Standard; Bearing Series:209 Series; Bearing Outer Ring Material:Steel; Bearing Family:Setscrew Ball Bearin;

D2:93.5 mm; Characteristic rolling element frequency, BSF:7.88 Hz; Preload value:0.226 kN; Mass:0.44 kg; B:18 mm; a:20.1 mm; d1:76.9 mm; Dynamic load, C:38.5 kN; Nlim (grease):14,200 rpm; ra max:1 mm;

Static load, C0:1.04 kN; Other Features:Deep Groove | Rubber; Precision Class:ABEC 1 | ISO P0; Enclosure Type:Non-Contact Seal | C; D:21 mm; da max:14.5 mm; Dynamic load, C:1.92 kN; rs min:0.3 mm; ra max:0.3 mm;

J:118 mm; d:31.75 mm; H2:82 mm; S:15.9 mm; L1:47 mm; H1:17 mm; Weight:1.19 kg; Recommended tightening torque for set screw:3.7 Nm; N:14mm; Z:52.3 mm;